RangeGuard.com - Easy Installation

Installation instructions: (No tools required)
Installación instrucciones: (No necesitas herramienta)

One

Pull range from wall approximately 7" to 8"

Despegue la estufa de la pared aproximadamente 7 a 8 puigadas.
Two
Lay Range Safety Guard facedown on top of front edge.

Ponga el "Range Safety Guard" boca abajo encima del borde de alfrente de la estufa.
Three
Clean and dry both sides of range. Each side of the range must be thoroughly cleaned and dried for proper installation.

Limpie y seque bien amboa lados de la estufa. Cada lado de la estufa tiene que estar completamente limpio y seco para que la installación quede bien.
Four
Remove paper only from Velcro (Do NOT separate Velcro)

Despegue solamente el papel del velcro (No despegue el Velcro).
Five
Stand Range Safety Guard up vertically on top of range as close to front edge as possible and press sides to adhere Range Safety Guard to range.

Ponga el "Range Safety Guard" encima de la estufa en forma vertical lo más cerca que pueda al borde de alfrente. Apriete los lados para adherir el "Range Safety Guard".
Six
Push range back to the wall.

Empuje la estufa hacia la pared original.

Removing your Range Safety Guard

To remove your Range Safety Guard for cleaning the range-top or the Range Safety Guard, simply separate the velcro fasteners on each side of the stove and lift off.

Cleaning your Range Safety Guard

Your Range Safety Guard will usually wipe clean with a damp sponge or cloth. For baked on splatters you may use any normal household cleaner such as Comet, Windex, Fantastic etc. applied with a non metallic scrubber sponge. Do not use steal wool as it will scratch and eventually remove the finish on your Range Safety Guard.

Easy to Install
(No tools Required)

Easy to Remove

Easy to Clean

Lifetime
Warranty

How to Order

To receive news of new products, join our mailing list!
Click Here

HOME

TO ORDER